UES E-Solutions

HomeKnowing UsNetwork & SecurityTalk To Us
Silver Peak Physical Appliances
Silver Peak Physical Appliances
Silver Peak's NX appliances were designed to meet the rigorous WAN optimization requirements of large enterprises, delivering the industry's top performance, scalability, and reliability.

High Capacity
Silver Peak's NX appliances scale from Mbps to Gbps of WAN capacity in a single device. At the high end, Silver Peak's NX appliances deliver over three times the LAN/WAN throughput, disk capacity, and simultaneous flows as the next closest WAN optimization solution. This makes Silver Peak the most cost effective WAN optimization solution for large networks.

Optimize ALL IP applications
Silver Peak NX appliances optimize all IP traffic regardless of transport protocol and application software version. Silver Peak's optimization techniques minimize latency, making them ideal for real-time applications like Voice over IP (VoIP), video, and VDI in addition to traditional file, email and web traffic.

Model NX- 1700 NX- 2700 NX- 3700 NX- 5700 NX- 7700 NX- 8700 NX- 9700 NX- 10700
WAN Bandwidth Capacity (all features + encryption) 4 Mbps 10 Mbps 20 Mbps 50 Mbps 155 Mbps 622 Mbps 1 Gbps 2.5 Gbps
Certified Connections 8,000 64,000 64,000 64,000 128,000 512,000 512,000 512,000
Local Data Store 1x500 GB 2x500 GB (Resilient) 1 TB (2x500 GB) 4 TB (8x500 GB) 5 TB (10x500 GB) 10x500 GB plus 4 x 64 GB SSD 10x500 GB plus 4 x 64 GB SSD 1.6 TB (16x100 GB SSD)
Disk Drives Single Resilient
Power Supplies Single Dual Redundant
Network 1+1 and N+1 with VRRP or WCCP
RAM ECC memory
Disk Encryption 128-bit AES
Network Encryption IPSec (128-bit AES)
LAN/WAN Ethernet 4 x 10/100/1000 LAN/WAN (2 LAN/2 WAN) 4xGigabit Ethernet copper data ports (2 LAN/2 WAN) or 2 x 10 Gigabit Ethernet fiber data ports (1 LAN/1 WAN) 4x1 Gbps fiber (2 LAN/2 WAN) or 2 x 10 Gbps fiber (1 LAN/1 WAN) 4x10 Gbps fiber (2 LAN/2 WAN)
Management 2 x 10/100/1000; RS-232 serial port
In-line (Bridge) Mode In-line between L2 switch and WAN router with fail-to-wire in case of failure In-line between L2 switch and WAN router with fail-to-wire in case of failure (copper only) In-line between L2 switch and WAN router
Out-of-Path (Router) Mode Attached to WAN router out-of-path with PBR redirection, WCCP and VRRP
Requirement 100- 240VAC / 47-63Hz / 90W / 307 BTU 100- 240VAC / 47-63Hz / 285W / 973 BTU 100- 240VAC / 47-63Hz / 305W / 1041 BTU 100- 240VAC / 47-63Hz / 345W / 1178 BTU 100- 240VAC / 47-63Hz / 475W / 1621 BTU 100- 240VAC / 47-63Hz / 520W / 1775 BTU 100- 240VAC / 47-63Hz / 600W / 2048 BTU 100- 240VAC / 47-63Hz / 600W / 2048 BTU
Power Supplies Single 1+1 Redundant
Height x Width x Depth 45 x 445 x 209 mm / 1 U 89 x 430 x 660mm / 2 U
Weight 3.9 kg 18.4 kg 18.4 kg 19.6 kg 20 kg 21.2 kg 21.2 kg 21.2 kg
EMC FCC Part 15 Class A, EN 55022 Class A, VCCI Class A, En 61000-3-2/3-3, En 55024
Safety UL/cUL/60950, En 60950
Temperature (Operating) 10 deg C to 40 deg C (50 deg F to 104 deg F)
Temperature (Storage) -40 deg C to 65 deg C (-40 deg F to 149 deg F)
Humidity 8% to 90% relative humidity non-condensing
CLI Full-featured CLI available over DB-9 console port via SSH
GUI • Web-based Appliance Manager available vis HTTPS (default) or HTTP
• Global Management Systems (GMS) provides centralized configuration, monitoring and management of multiple NX appliance
Secure Access SSH and HTTPS
Logging Syslog with configurable levels. Email alerts
Authentication Local database, RADIUS, TACACS+
Statistics Graphing and monitoring, real-time and historical

To send in your enquiry, please click here.